|
|
 |
R236 Workhorse Regulator
R-236C Regulator with unbalanced piston 1st stage (R-1 Stage-P), and non adjustable 2nd stage with black, green and yellow covers.
The Workhorse™ unbalanced regulator has been the standard in SCUBA diving for years. It is rugged, simplistic, dependable, low cost design lends itself for use as a primary, recreational, technical and DECO regulator.
This regulator in fact was utilized by the National Park Service as a primary SCUBA regulator in its 190+ foot dive to the B-29 bomber in Lake Mead! The Workhorse™ comes standard with (1) Black (installed) (1) Green (Oxygen) and (1) Yellow (Nitrox) cover.
Option : R-236D Balanced Diaphragm 1st stage (R-251)
|
|
|
|
|
|
 |
R-600 Deep Performance Reg
R-600 Deep Performance Regulator with carrying case
FIRST STAGE SPECIFICATIONS
Design : Environmentally Sealed and Balanced Diaphragm
Material: Brass with Copper Nickel Chrome plate and Stainless Steel
Environmental seal: Yes
Ports: Fixed Ports
Low pressure ports: 4 angled in the correct direction for use
High pressure ports: 2 angled in the correct direction for use
Regulator to Cylinder Valve interface: 300 Bar Din with Yoke adapter included
SECOND STAGE SPECIFICATIONS
Design: Pneumatically balanced
Material: Thermoplastic, Brass, Stainless Steel
Gas Flow Adjustment: Diver adjustable flow knob
Venturi control" Diver Adjustable
Regulator Body Material: Engineered thermoplastic
Second stage can be configured for use on divers right or divers left.
|
|
|
|
|
|
 |
R-242 Workhorse Octopus with 40 hose
R-242 Workhorse Octopus with 40" hose
Cover Color : Black
|
|
|
|
|
|
 |
R250 High Performance Regulator
R250 High Performance Regulator
The OMS® R-250 2nd stage features an adjustment knob for increased air flow and a Venturi assist for excellent WOB (work of breathing).
The (R-251) first stage incorporates a balanced diaphragm design that offers high performance and is clearly the choice for cold and / or contaminated water. The first stage is designed for vertical or horizontal positioning and with the (2) HP and (4) LP ports many hose configurations are possible.
|
|
|
|
|
|
 |
R-246 High Performance 2nd Stage (Octopus )
R-246 High Performance Octopus with 40" (101.6cm) hose
2nd stage features an adjustment knob for increased air flow and a Venturi assist for excellent WOB (work of breathing).
Cover Color: Black
|
|
|
|
|
|
 |
R-251 1st Stage (Balanced Diaphragm)
R - 251 Balanced Diaphragm 1st Stage
Material: Brass & Stainless Steel
O-Ring Rings / Grease : Viton / O2 Grease
Intermediate Pressure : 135 psi (9.3 bar)
HP Ports: 2
LP Ports: 4
Lpm @3000 psi : 1950 LPM
Valve Interface :300 BAR DIN
|
|
|
|
|
|
 |
R-1Stage-P 1st Stage (Unbalanced Piston )
R - 1 Stage - P : 1st Stage (Unbalanced Piston)
Materials : Brass Stainless Steel
O2 Service : YES
Intermediate Pressure : 135 psi (9.3 bar)
HP Ports : 1
LP Ports : 3
Lpm @ 3000 psi : 1950 LPM
Valve Interface : 300 BAR DIN
|
|
|
|
|
|
 |
R-239 Yoke Adapter
R-239 Yoke Adapter
DIN to Yoke Adapter
|
|
|
|
|
|
 |
R-OPRV 1st Stage Over Pressurization Relief Valve
R-OPRV Over Pressurization Relief Valve for 1st Stage LP Port Valve
Material : Brass / Stainless
Vent Pressure : 300 psi (20.6 bar)
|
|
|
|
|
|
 |
R-S3-K shutoff
Regulator 2nd Stage shutoff to LP hose
by actuating the black slide on the S3 can positively shutoff a free flowing 2nd stage and continue to dive switching to the redundant regulator (on a set of doubles) or an alternate air source. The R-OPRV is installed in one of the LP ports in the first stage, is mandatory as it vents excess pressure buildup between the second and first stages and prevents hose failure.
details : www.omsdive.com
|
|
|
|
